Some links in this article may be affiliate links. See our disclosure policy.
Reviewed July 22, 2026
Standard plaster runs $5,000–$8,000, quartz aggregate $6,000–$12,000, pebble/exposed aggregate $8,000–$20,000, and high-end tile or glass bead finishes $10,000–$30,000+ for a typical Central Florida pool. The finish you choose is the single biggest factor in cost.
Central Florida Pool Guide is reader-supported. Some pages may contain affiliate or referral links. If you buy through these links, we may earn a commission at no extra cost to you.
By Central Florida Pool Guide · Last updated June 25, 2026.
If your Orlando pool is looking rough — stained plaster, a gritty surface, visible cracks, or water that just won’t stay balanced — it’s probably time to resurface. Resurfacing is one of the bigger expenses of pool ownership, and the price swings a lot depending on the finish you choose, your pool’s size, and the condition of the existing surface.
Here’s a straight breakdown of what pool resurfacing actually costs in the Orlando and Central Florida area in 2026, what drives the price, and how the finish options compare.
Quick note: Prices below are typical 2026 ranges for Central Florida. Every pool is different — always get a few local quotes before budgeting. Costs vary by pool size, finish, and surface condition.
Quick answer: Orlando pool resurfacing cost
For most Central Florida pools, expect to pay:
- Standard plaster (white or colored): $5,000–$8,000
- Quartz aggregate: $6,000–$12,000
- Pebble / exposed aggregate (Pebble Tec, Pebble Sheen, Diamond Brite): $8,000–$20,000
- High-end tile or glass bead finishes: $10,000–$30,000+
The finish you choose is the single biggest factor in your final cost. Below is how each option breaks down.
Pool resurfacing finish options and costs in Florida
Standard plaster (white or colored)
Cost in Orlando: $5,000–$8,000 for a typical residential pool
The original and most affordable option. White marcite plaster has been the standard pool finish for decades — smooth, clean-looking, and cost-effective. It’s also the least durable option, typically lasting 7–12 years in Florida’s conditions before needing resurfacing again. Colored plaster (grey, blue, or tan) costs slightly more but gives a more custom look and hides staining better than white.
Best for: budget-conscious owners, pools being sold in the near term, or rental properties where cost control matters most.
Quartz aggregate
Cost in Orlando: $6,000–$12,000
A middle-ground option. Quartz aggregate adds crushed quartz crystals to the plaster mix, creating a finish that’s smoother than exposed pebble but more durable and stain-resistant than plain plaster. A solid balance of cost, durability, and appearance.
Best for: owners who want better longevity than plaster without jumping to full pebble pricing.
Pebble / exposed aggregate (Pebble Tec, Pebble Sheen, Diamond Brite)
Cost in Orlando: $8,000–$20,000 depending on size and product
The most popular upgrade in Central Florida. Exposed aggregate finishes embed small pebbles, quartz, or glass beads into the plaster, creating a textured, natural-looking surface that’s far more durable than standard plaster.
Why it’s popular in Florida specifically:
- Lasts 15–25 years vs. 7–12 for standard plaster — a meaningful difference given our long use season
- More resistant to staining from algae, pollen, and mineral deposits
- Better chemical resistance, which matters in our high-demand climate
- Comfortable underfoot and looks premium
Not all pool companies are certified to apply these products — confirm your contractor is a licensed applicator for the specific brand (like Pebble Tec) if you go this route.
Best for: pools being kept long-term and owners who want to minimize how often they resurface.
High-end tile or glass bead finishes
Cost in Orlando: $10,000–$30,000+
Full-tile interiors or glass bead finishes are the premium end of the market — beautiful and extremely durable, but priced for luxury builds or full renovations where the whole project is already a major investment.
What affects resurfacing cost in Central Florida
Beyond the finish, several factors move the final number:
- Pool size and shape. A standard 15×30 pool costs less than a 20×40 with a deep end, steps, and benches. More surface area means more material and labor.
- Condition of the old surface. If the existing plaster has to be chipped out (vs. prepped over), or if there’s structural cracking or rebar damage, expect added cost.
- Tile and waterline work. Replacing waterline tile or coping at the same time adds to the total — but it’s often cheaper to do it all in one project.
- Draining and refilling. Resurfacing requires draining the pool, and refilling it adds water cost (and time) in our climate.
- Accessibility. Tight backyards, screen enclosures, or limited access for crews and materials can raise labor costs.
How long does pool resurfacing last in Florida?
Lifespan depends heavily on the finish and how well the water is maintained:
- Standard plaster: 7–12 years
- Quartz aggregate: 10–15 years
- Pebble / exposed aggregate: 15–25 years
Florida’s heavy use season and intense sun are hard on pool surfaces, and poor water chemistry shortens the life of any finish. Keeping your water balanced is the single best thing you can do to protect a resurfacing investment.
Signs it’s time to resurface your pool
Not sure if you’re there yet? Common signals include:
- Rough or gritty surface that’s uncomfortable on feet and hands
- Persistent staining or discoloration that won’t clean off
- Visible cracks, chips, or flaking plaster
- Exposed aggregate or rebar showing through the surface
- Water that’s increasingly hard to keep chemically balanced
- Plaster “dust” in the water or on pool equipment
Should you resurface or replaster? Getting quotes
The best way to budget accurately is to get three quotes from licensed Central Florida pool contractors. Resurfacing pricing isn’t standardized, and quotes can vary by thousands depending on the company, the finish, and what’s included (tile, coping, draining, startup chemistry).
When you compare quotes, confirm:
- Exactly which finish and product is being used
- Whether tile, coping, and drain/refill are included or extra
- The warranty on the finish and the labor
- That the contractor is licensed and insured in Florida
Bottom line
For most Orlando-area pool owners in 2026:
- On a budget: standard plaster at $5,000–$8,000 gets the job done, but you’ll resurface again sooner
- Best long-term value: pebble/aggregate at $8,000–$20,000 lasts far longer and handles Florida’s conditions better
- Premium: tile or glass at $10,000–$30,000+ for luxury renovations
Resurfacing is a long-term investment — and in our climate, paying a bit more for a durable finish often costs less over the life of the pool. Whichever route you choose, get multiple quotes and keep your water balanced afterward to protect the work.
Related guides
- How Much Does Pool Maintenance Cost in Orlando?
- Orlando Pool Permit Checklist
- Pool Costs & Pricing in Central Florida
Central Florida Pool Guide — real pool advice for Orange, Seminole, Osceola, Lake, and Polk counties.
CFPG provides general educational information, not legal, engineering, electrical, insurance, lending, or permitting advice. State and local requirements change and may differ by city, county, property, permit date, pool type, and scope of work. The current statute, adopted code, manufacturer instructions, permit record, and responsible authority control.
Resurfacing Material Options
What Drives Resurfacing Cost
More surface area means more material and labor.
Chipping out old plaster or fixing structural cracks adds cost.
Often cheaper to replace tile/coping in the same project.
Tight backyards or screen enclosures can raise labor costs.
Signs It May Be Time to Resurface
- Not confirming exactly which finish and product is being quoted.
- Assuming tile, coping, and drain/refill are included when they may be extra.
- Skipping the warranty question — ask what's covered on the finish and the labor.
- Not confirming the contractor is licensed and insured in Florida.
- Getting only one quote — resurfacing pricing isn't standardized and can vary by thousands.
Frequently Asked Questions
How long does pool resurfacing take?
Timelines vary by contractor and finish, but draining, prep, application, and refilling typically take about one to two weeks — get a specific timeline from your quotes.
How long does pool resurfacing last in Florida?
Standard plaster lasts 7–12 years, quartz aggregate 10–15 years, and pebble/exposed aggregate 15–25 years. Keeping your water balanced protects the finish longer.
Is pebble finish worth the extra cost?
For pools you plan to keep long-term, often yes — it lasts 15–25 years versus 7–12 for standard plaster and resists staining from algae, pollen, and minerals better in Florida's climate.
What should I confirm before choosing a contractor?
The exact finish/product being used, whether tile/coping/drain-refill are included, the warranty on finish and labor, and that the contractor is licensed and insured in Florida.