Author: <span>Central Florida Pool Guide</span>

Quick Answer: After a hurricane or tropical storm, do not jump straight into shocking the pool or restarting the pump. First make sure the pool area is safe, check for downed power lines or submerged equipment, remove large debris, empty the skimmer and pump baskets, and confirm the equipment pad is dry and safe to […]

Quick Answer: If your HOA rejects a pool or screen enclosure project, ask for the specific written rule behind the denial, revise the plan if needed, and follow the community’s appeal process. Do not start work anyway unless you have confirmed your rights with qualified legal guidance. First, Do Not Panic An HOA rejection is […]

Quick Answer: Central Florida HOA pool rules vary widely by community, so never assume one neighborhood’s rules apply to another. HOAs commonly regulate screen enclosure style, fence type, pool location, lighting, visible equipment, landscaping, noise, and exterior appearance. Why HOA Rules Matter Before Pool Work A pool project can meet building code and still violate […]

Quick Answer: Most equipment-pad leaks come from pump seals, O-rings, unions, filter clamps, valves, heaters, or PVC fittings. Small leaks are often repairable, but cracked pressure tanks, internal heater leaks, motor water damage, and repeated failures usually need professional repair or replacement. Why Equipment Leaks Matter A tiny drip may not seem urgent, especially outdoors. […]

Quick Answer: After storm damage, document everything before cleanup, prevent further damage if safe, keep receipts, and contact your insurer directly. For pool cages and pool equipment, coverage depends on the policy, cause of damage, deductible, and whether flood, wear-and-tear, or exclusions apply. Start With Safety After a storm, do not rush onto a wet […]

Quick Answer: Most salt system problems come from low flow, dirty cells, wrong salt level, short pump runtime, water chemistry imbalance, or an aging cell. In Central Florida, heat, hard water, storms, and year-round chlorine demand can make these issues show up faster. Salt Systems Are Helpful, Not Automatic A salt chlorine generator can make […]

Quick Answer: Homeowners insurance may cover some pool cage or pool equipment damage if the cause is a covered peril, but coverage varies widely by policy. Do not assume screen enclosures, pool heaters, pumps, or flood-related damage are covered without checking your declarations page, endorsements, exclusions, and deductible. Why This Question Is Tricky in Florida […]

Quick Answer: If your pool heater is not heating, first check pump flow, filter pressure, heater settings, valves, and error codes. In Central Florida, many “heater problems” are actually dirty filters, low pump speed, bad flow, cold-air limits, or water chemistry issues. Start With the Type of Heater Troubleshooting depends on whether you have an […]

Quick Answer: An unpermitted pool can create practical problems with inspections, insurance, resale, safety compliance, and future repairs. The impact varies by property, county, lender, and policy, so buyers should involve the local permitting office, inspector, real estate agent, and possibly a real estate attorney before closing. What “Unpermitted Pool” Usually Means An unpermitted pool […]

Quick Answer: High filter pressure usually means water is being restricted after the pump, most often by a dirty filter. In Central Florida, pollen, storm debris, algae cleanup, sunscreen, and hard-water scale can all make filter pressure rise faster. What Filter Pressure Means Your pool filter pressure gauge measures resistance in the system after the […]